Retatrutide 40mg (R&D Only)

Product Information

Certificate of Analysis (COA): Batch-specific purity report — HPLC & Mass Spectrometry verified. Request COA

How to Use Your Retatrutide Research Injection Pen

The following steps describe standard operation of the pre-filled research device for delivery mechanism evaluation in controlled laboratory settings.

How to Dose

When initiating a Retatrutide research protocol, a gradual dosing plan is typically used in published studies to assess compound response over time. The schedule below is provided as a reference research protocol only — not as guidance for personal use.

Recommended Research Dosing Schedule

Protocol progression may be adjusted based on observed research parameters. If response indicators remain stable at a lower dose (e.g. 2.5mg), that dose level may be maintained longer (e.g. 6+ weeks) before advancing to the next tier. Increase dose levels only when protocol criteria indicate progression is required.

Dose by Clicks (Dial Setting)

Research protocols typically specify once-weekly administration on the same day each week. Always confirm the correct dose is shown in the pen’s display window before proceeding.

Tips for Best Use

Laboratory handling recommendations for research device operation, dosing, and storage.

Using the Pen

• Always prime the pen before the first dose by releasing a small amount into the air.
• Use a new needle for every session to avoid contamination and clogged flow.
• Operate the device slowly and hold the button down for at least 5 seconds to ensure full delivery.
• Rotate application sites weekly (stomach, thigh, or back of upper arm) to reduce skin irritation during device evaluation.
• Press gently with gauze after delivery, but do not rub the area.

Dosing Smartly

• Begin at 2.5mg and advance gradually only when protocol requires.
• If research parameters remain stable at the current dose, maintain that level longer before increasing.
• Dial reference: 15 clicks = 2.5mg · 30 clicks = 5mg · 45 clicks = 7.5mg · 60 clicks = 10mg
• Keep a log of dose settings and dates, especially during protocol adjustments.

Storage & Handling

• Keep unused pens refrigerated at 2–8°C until needed.
• Once opened, the pen may be stored at room temperature (max 30°C) but refrigeration is recommended when not in active use.
• Always recap the pen and remove the needle after each use.
• Never reuse needles or store the pen with a needle attached — this can lead to leaks or air entering the pen.
• Dispose of used needles in a proper sharps container per laboratory protocol.

How to Store

To maintain compound stability and device integrity for research purposes, store your SlimShot Retatrutide pen according to the following guidelines:

Before First Use

• Store in the refrigerator at 2°C to 8°C
• Keep the pen in its original packaging to protect from light
• Do not freeze the pen. If frozen, it must be discarded

After First Use

• You may store the used pen at room temperature (up to 15°C) for up to 4 hours during active research sessions
• Keep away from direct heat, sunlight, and moisture
• Always replace the pen cap after each use to prevent air exposure or leakage
• Do not store with the needle attached

Keep out of reach of children. For disposal guidance or research enquiries, contact us via the contact form.

Shipping & Delivery

All orders are securely and discreetly packaged with no external branding identifying the contents. A tracking number is issued with every order.

Frequently Asked Questions

Verified Customer Reviews